This is the 1/8 scale glow powered, radio controlled,
HPI Savage X SS off road Monster Truck Kit
with the K4.6 Engine and clear Nitro GT-2 Body.
Unassembled and requires radio system.

**Additional Technical Info Will Be Added When It Becomes Available.**

FEATURES: Chassis: Rigid 6061 series aluminum TVP (Twin Vertical Plate)
Drive: Four wheel shaft drive with heavy duty dogbones
Engine: HPIG1501, HPI K4.6 with 2.9 horsepower, with pull-start, ABC
construction, 8 port chrome plated brass sleeve for high RPM
operation, lightweight aluminum piston and connecting rod,
8.5mm composite carburetor for improved high temperature tuning,
glow plug and dual stage air filter
Exhaust: Dual chamber polished aluminum tuned pipe with header
Fuel Tank: 5.4oz (160cc), flip top cap
Clutch: Three shoe
Transmission: Two-speed with adjustable slipper clutch and heavy
duty metal gears
Ball Bearing: Full set of rubber sealed bearings
Shocks: Eight oil-filled, long stroke with coil-over spring
Main Gear: _--tooth
Gearbox: Sealed front and rear
Differentials: Four gear planetary type with heavy duty diff shafts
Brakes: Adjustable dual vented stainless steel discs
Tires: Dirt Bonz, diameter: 5.71" (145.1mm), width 3.38" (85.8mm)
sticky S compound with bone shaped tread for high traction on dirt
Wheels: Chrome Warlock with 17mm hex
Body: Pre-trimmed unpainted Nitro GT-2 with pre-cut decals
Bumpers: High impact nylon front and rear skidplate type
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Suspension: Front and rear heavy duty reinforced suspension arms
uprights and knuckles, wide track (nearly 17") (432mm) design
Steering: Bell crank
Servo Saver: Adjustable cam type for optimum steering response and
extra servo gear protection

INCLUDES: One HPI Savage SS X Monster Truck kit with oil shocks, K4.6 engine,
clear body, decals, tires, foam inserts, -- spoke chrome wheels
-- tooth clutch bell, -- tooth spur gear, instructions

REQUIRES: Radio: 2-Channel with 1 standard servo for throttle, 1 high
torque servo for steering, and 1 standard size and torque servo if
the optional reverse module (HPIC8739) is purchased.
*If using the optional reverse module a 3-channel radio must be used.
Radio Batteries: (8) AA size
Glow Starter: 1.2 volt
Paint: Polycarbonate for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.

SPECS: Vehicle-
Length: " ( mm)
Width: " ( mm)
Height: " ( mm)
Wheelbase: " ( mm) wheels on-center front-to-rear
Suspension Travel: " ( mm)
Tires- Front and Rear: " x " ( x mm)
Body-
Length: " ( mm)
Width: " ( mm) at rear wheels, widest point
" ( mm) behind from wheels, thinnest point
Height: " ( mm)

COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
4 8x16x5 FR & R gearboxes 2 DTXC1585
3 10x16x5 FR, CTR & R Diffs 2 HPIC2032
5 6x13x5 CTR gearbox 3 DTXC1573
1 8x16x5 CTR gearbox 1 DTXC1585
2 5x10x4 Clutch 1 HPIC0021
4 8x16x5 FR uprights (wheels) 2 DTXC1585
4 8x16x5 R uprights (wheels) 2 DTXC1585

If the customer wants to convert from recoil to Roto Start they can
purchase HPIP7126.

Body pictured on box is painted orange with silver and black accents.

jxs 5/12/06